Anti-Graffiti

Window Film and Water

Most windows films are applied using a solution of soap and water. The adhesives of window film are on the film. To activate the adhesives they need to be completely soaked with water, making water one of the most important aspects of a good window film installation, well that, and a great Installer.

Because water is so important, Solar Vision Inc. has decided to partner with Culligan Water to ensure we are only using the best water on the market for our window film installations. Our in-shop water filtration system uses reverse osmosis, and softening to ensure the cleanest install possible. 

Water can be different all over town depending on the city you live in. Some cities have very hard water which can leave a haze on your glass, and make the install very difficult, by using purified Culligan water straight from our shop, our installs are consistent, no matter what part of Colorado you are from. 

A good film install starts with a great Installer, the best window film on the market, and Culligan Water. 

A good film install starts with a great Installer, the best window film on the market, and Culligan Water. 

This little co-branded contraption is a pressurized water tank used for installing window film. 

This little co-branded contraption is a pressurized water tank used for installing window film. 

3M Film Uses in Hotels

3M film uses in hotels are many.  Window film can provide energy savings, comfort, and added safety and security.  Architectural films can provide beauty and give the hotel a unique look.  The creative environment is limited only by one's imagination. Safety and Security is enhanced by using a safety and security film to prevent break-ins.  In vulnerable areas, the film will prevent intruders from breaking a glass to get in the building.  Often hotels are in places without a lot of people around, so this would give extra security to a building.  Another way 3M window film can add to security is that if there would be an event such as strong winds, hail, etc. which could break the glass, the glass would hold together and not allow shards of glass to fly and cause injury.  If a hotel is in an area where there is graffiti, anti-graffiti film can be applied to the glass protecting it from paint, acid, scratching.  The film acts as a sacrificial layer which takes the graffiti and can be removed. (solutions.3m.com)

Solar Control can be achieved through 3M Window film.  Glare can be greatly reduced.  Heating and air conditioning costs can be reduced with the application of one of 3M's variety of solar control films.  UV rays are reduced by most films by 99 % eliminating the harmful effects of the UV rays on carpeting, drapes, art, furniture and other furnishings.

Decorative Films can be used in the building to make updated creative environments.  Graphics on film can put any picture on a wall at any size.  Fasara films can be used to add privacy and beauty.  The films can be die-cut or custom printed. Di-Noc can be used to remake surfaces such as pine into teak or paint into marble. There are hundreds of surfaces to choose from.

Solar Vision's Mission Statement is to inspire a passion for and generate living and working environments that are comfortable, safe, energy efficient and innovative.  Let Solar Vision's staff inspire you.

Window Film Uses in Churches

IMG_1105.2015-05-20_150714_kindlephoto-6830303-1.jpg

Window film uses in churches add to their beauty, safety, and energy efficiency. There are few things more beautiful than a stained glass window.  The window creates a worshipful environment and help to set the tone in the church building.  Stained glass is very expensive and not all churches have the resources to have them.  Window film can be used in place of stained glass to give the church the atmosphere it wants.  Traditional art can be used or modern art can be used.  Any picture or any graphics can be imprinted on the film and put on the glass at a fraction of the cost of stained glass. The picture can be on one side or both sides.  A picture can be made so that one can see through the glass on one side and have the picture on the other.  Logos and murals can be put up on any flat surface of the church.  Some churches are mixing new art with the more traditional art.  New technology is used to create whatever look the artist imagines.

Bible versus can be used to remind people of messages the church wants to emphasize.

Privacy can be added where it is needed in the church using Fasara frosted film.  So many looks can be achieved through the use of Fasara films. Computer aided design techniques are used to plot and cut the film.(solutions.3m.com)

Solar control window film will cut down on energy costs and if there would be film breakage  because of something like a weather event, the film would hold the glass shards together and prevent injuries.  The film cuts down on glare and protects furnishings from harmful UV rays.

Unfortunately, sometimes churches are targeted by vandals.  Anti-graffiti film can be placed on signage or windows to prevent vandals from ruining the sign or glass.  Safety and security film can be put on glass to prevent break-ins.  Because some of the time no one is in the church, the church may be a target for robberies or vandals.  The films give an extra layer of protection.

The window film is used in retrofitting situations as well as new construction.  It is easy to clean.

Our Solar Vision mission is to inspire a passion for and generate living and working environments that are comfortable, safe, energy efficient and innovative.  If you have any design needs, comfort, and/or security needs in your church, please call Solar Vision.  Our staff will work with you to meet your needs.

 

 

Window Film Products

SV_logo_wp.png

There are many window film products.  The technology to create these new films is continuing to advance.  We can look forward to many new uses for window film to save energy and to improve safety.  The way we use window film to create beautiful working and living environments will continue to improve.  I'm sure my list is not complete, but here is a good start to what is available in the window film industry. Anti-Fog Window Film is a film that is used in areas of high humidity. The glass does not fog.

Anti-Graffiti Window Film is used as a sacrificial layer when vandals use acid, permanent markers, paint, etc. The film is removed and replaced and protects the glass.

Anti-Spy Window Film protects computer information from hackers or communication from being overhead by listening devices.

Blackout Window Film is film that blocks almost all light.  It is used in places like sports viewing rooms or to completely block a view.

Bomb Blast Protection Window Film is used in buildings where there may be a risk of an explosion or terrorist attack.. The film holds the glass fragments together and greatly reduces injury. (https://www.youtube.com/watch?v=eqUjGNmh0zg)

Bullet Proof Window Film prevents or slows the ability of a bullet to penetrate the glass.

Daylight Redirecting Window Film controls the light coming into a room, directs the light to the ceiling and down into the room, reducing the amount of artificial light needed in a room.

Decorative Window Film is used to provide privacy and beauty to a room. It comes in patterns and a number of degrees of frost. It can be die-cut to do branding or almost any custom design.

Dichroic Window Film has a shimmering color shifting effect. It comes in warm and cool colors. The cool have a range of purple and blues and the warm yellow to red.

Exterior Window Film is film applied to the outside of the window when it is very difficult or impossible to apply it to the inside.

High Impact Rear Projection Film is film that transforms any window or glass partition into a digital display screen.  It can be any shape or size.  (multimedia.3m.com/mws/.fn=PROJECTION%20COMBINED.pdf)

Gradiant Window Film starts with frost on the bottom and gradually goes to clear. It can also have a color on bottom and go to clear on the top.

Graphic Window Film has any picture printed on it and at any size.  The picture can be seen on one side and a clear window on the other.

One Way Mirrored Film has a mirrored surface and one can be see through from the other side undetected.

Photovoltaics Window Film has tiny solar cells to convert sunlight into direct current electricity.

Reflective Window Film has a metallic look.

Smart or Switchable Window Film changes from frosted to clear when it is turned on or off.

Safety and Security Window Film prevents intruders from getting into a building easily. Also comes with attachments to increase effectiveness.

Solar Control Window Film is the most common window film. It is used to reduce glare, eliminate UV Rays, protect furnishing, increase comfort, and provide energy savings. There is a wide range of this film.  (solutions.3m.com)

View Controlled Window Film is a film that controls what is seen through the glass. There are 3 different view control films that offer 2 angles of view. The product is applied vertically or horizontally giving a different view. This can accent one space over another. This product is put out by Lumisty.

Most of these products are offered by 3M.  Other brands also carry some of these window film products.  Solar Vision is a dealer for the 3M Prestige line.  We know that the 3M company stands behind all their products.  The reputation of the 3M company is unsurpassed. We are, however, able to install other brands as well.

School Safety Improvement

Security-Film-Schools-e1409780626675.jpg

School safety is an ever growing concern for schools. As a teacher of 34 years, I have seen a number of ways window films can be effectively used to improve school safety. The window film is retrofitted into already existing buildings which is much less expensive than replacing windows. Applying the film creates no mess and the windows are easily cleaned. Safety

Accidents involving glass account for a large percent of injuries in schools. Large areas of glass may not be seen by students and they may run into them. It is important to make the glass more visible. This can be done by applying opaque film or simple patterned film to the glass such as Fasara (http://solutions.3m.com/ ) It is important to make it apparent that the glass is there. The film can cover all or a portion of the glass. Every window or other transparent surface in a wall, partition and door or gate should be of safety material or be protected against breakage of the transparent material. It should be appropriately marked or have something to make it apparent. Film around door handles also help make the glass visible. Graphics can be used to make the glass more visible. The film can add to the learning environment and make it very creative and appealing. Graphics can be used to increase school spirit or motivate achievement in students and staff. Any picture or logo can be printed on the film.

Lettering Applied at Education Center

Safety glass is required in high risk areas. Window film will hold the glass in place if someone runs into the glass. Tempered or toughened glass breaks into squares. Tempered glass may be defective because of manufacturing flaws. Impurities can get into the glass. Sometimes during installation small chips may occur. As the glass expands stresses will develop which may break the glass. When the stress is greater than the strength of the glass it will break. Window film on tempered glass assures that no one will be cut by the glass. Clean up is also very easy.

Glass should be:

  •  Safe from breakage
  •  Visible to avoid accidental collision

Safety can also be increased during weather events with window film. With straight line winds or a tornado most injuries are caused by flying glass. The window film holds the glass shards together. People in the building will not get cut by flying glass.

Security

Unfortunately, we live in a world where we need to keep unwanted intruders out of our schools and away from our children. As a teacher in a rural public high school, quite often we had bomb threats. Real or just a stupid prank, the school officials had to take it seriously. We would have to be moved to another school or a nearby church until the building was secure. If the threat had been real and there had been an explosion, bomb blast window film would prevent glass shards from entering the rooms and injuring students. 90% of all injuries from bombs is caused by flying glass. Even a small piece of glass can injure someone.

If a gun was rumored to be in the school or if there was a tip of a threat, then the school goes into lock down. All the classroom doors are locked until the threat has passed. Schools now have all outer doors locked. One generally has to be let into the school by someone in the office. If a person comes to the door shooting or begins shooting after entering, there is bulletproof window film. The film is expected to delay an active shooter from entering a school from three seconds to two minutes.

Security window film with an attachment will prevent entrance into the building.  A person using something like a baseball bat or crowbar, will be disappointed. Chances are the person will move on. A determined person still may get into the building, but his entry will slowed to the point that the police will have an opportunity to arrive on the scene.  The security film helps to prevent break-ins for theft or vandalism.  Solar Vision has applied 3M™ Safety and Security Window Film to several  school entrances as a test sites for other schools. 3M™ Safety and Security Film is being used in an increasing number of schools. 3M recommends using the Ultra Series S600 or the Safety Series S140. Impact Protection Attachment Systems bond the filmed window to the frame optimizing security. (http://solutions.3m.com/wps/portal/3M/en_US/Window_Film/Solutions/Support/Safety_and_Security_Window_Films)

At a 2014 Campus Safety Conference held at the University of Southern California , Brad Spicer, SafePlans CEO, outlined strategies to improve the safety of main entrances. One thing he recommended was having shatter resistant security window film applied on the doors and windows to make it harder for intruders to enter the building.. (http://www.campussafetymagazine.com/article/physical_securitys_role_in_a_k_12_environment)

Why use security Film in Schools:

  •  Security film is less expensive than replacing all windows and doors with laminated glass.
  •  The security film is easy to apply over existing glazing
  •  The film doesn't stop a determined individual from entering a building, but gives extra time for help to arrive.

Anti-Graffiti

Why do kids do graffiti??? It is such a waste and such a problem in schools. Anti-Graffiti film can be applied to windows. The film acts as a sacrificial layer. The acid, paint or permanant marker is on the film. The film then can be removed and reapplied. Doing this quickly keeps from giving the vandals the attention they seek. The film can be applied to bathroom mirrors and outdoor signs as well.

Anti-graffiti film at the City County building

Anti-Graffiti Film Protects Windows

City-coounty-building-anti-g.jpg

Anti-Graffiti Film protects windows from permanent damage.  Urban centers all over the country are having difficulties with graffiti.  City officials, residents, and property owners are continually seeking solutions to the abatement of graffiti in their neighborhoods.  Anti-Graffiti window film have properties to decrease the harmful effects of graffiti.  Anti-Graffiti window film can be a less costly solution over window replacement. Cities, not only in the US but all over the world are having trouble with graffiti vandalism. When graffiti is visible, people are less likely to shop, eat, go to other venues in the area. People are concerned that if graffiti is allowed that other crimes may also be in the area. Gang activity is also a concern.  Residents and visitors do not feel safe.  Graffiti can be in rural or small town areas as well.

City leaders seek ways to combat this growing issue.  One way is to take down graffiti ASAP. Window film can help remove the graffiti quickly.  The tagger or gang member wants to be recognized and if it is not up long, they won't get the attention they seek.  Another way is to give graffiti artist a place to do and show their work.  This can work for the person who is trying to get artist recognition.  Denver recently has added more police presence downtown for reasons other than graffiti, but graffiti is a part of it. Some youth like to show their independence from authority or take their anger out on people through graffiti.  Schools could benefit from window film by putting window film on restroom mirrors and other glass surfaces.  Graffiti is a senseless crime that is very costly. The city of Denver spends over a million dollars a year on graffiti removal.  Larger cities spend even more.  Window film can't solve the graffiti issue, but can be used as one of many tools.

Advantages of  3M Anti Graffiti Window Film Include:

  • Scratch resistant
  • Protects glass from permanent damage
  • Gouge resistant
  • Easily removed and replace by professional
  • Used indoors or outdoors
  • Resists acid or etching tools
  • Can be cleaned as any other window surface
  • Anti-graffiti film is clear and distortion free
  • Has other benefits of window film such as 99% blocking of UV rays
  • Comes is two thicknesses for low risk and high risk areas
  • Backed by 3M warranties

Window replacement can cost up to twenty times the cost of window film. Window film is one of the many tools businesses and communities are using to combat the costly damage of graffiti.