Window Film and Water

Most windows films are applied using a solution of soap and water. The adhesives of window film are on the film. To activate the adhesives they need to be completely soaked with water, making water one of the most important aspects of a good window film installation, well that, and a great Installer.

Because water is so important, Solar Vision Inc. has decided to partner with Culligan Water to ensure we are only using the best water on the market for our window film installations. Our in-shop water filtration system uses reverse osmosis, and softening to ensure the cleanest install possible. 

Water can be different all over town depending on the city you live in. Some cities have very hard water which can leave a haze on your glass, and make the install very difficult, by using purified Culligan water straight from our shop, our installs are consistent, no matter what part of Colorado you are from. 

A good film install starts with a great Installer, the best window film on the market, and Culligan Water. 

This little co-branded contraption is a pressurized water tank used for installing window film. 

This glass is ready for pick up!

Sometimes it just makes more sense for Glaziers to have their glass dropped off so that we can do the film install in our shop. This allows our Installers to control the elements like dust and dirt, while working more efficiently and quickly, which in turn saves our customers $$$. 

The film product featured below is 3M's Black Electrocut. This film is a great solution for hiding walls, and building interiors you do not want viewable from outside. 

Solar Vision Inc. Installer Josh is just finishing up this 3M Black Electrocut Install. 

Custom glass racks make it easier, and safer for us to transport the glass to your trucks. 

3M™ Dusted Crystal

You probably didn't noticed but 3M™'s Dusted Crystal Window Film is all over town as it's one of the most versatile window films on the market. Using 3M™ Dusted Crystal alone can give your windows an etched look for a fraction of the cost of sand blasted glass, but aside from that, did you know you can print, and custom cut 3M™ Dusted Crystal too?

Call Solar Vision Inc. today @ 303-862-6376 if you're looking to upgrade and customize your glass using 3M™ Dusted Crystal Window Film, or any of our 3M™ Window Film products.

Custom Design using 3M™ Dusted Crystal

Denver Skyline printed on 3M™ Dusted Crystal

White Out Window Film

White Out Window Film can be used instead of Black Out Window Film to completely block out the view.  The film does let in some light.  In this case the film is used to block a door that is no longer used as an entrance.  The white would still be an attractive backdrop for displays and would help gain product display area.  The white out also eliminates glare in the space.  In homes, this film is often used in door sidelights.

White Out Window Film:

• Blocks 99% of vision
• Let's in some light
• Reduces glare and fading of furnishings
• Rejects 99% of UV rays
• Is easy to clean like any other window after 30 days
• Is attractive
• Adds privacy

New Technology in Window Film

New technology in window film makes for a bright future in the business of window film.  Presently, energy saving films and decorative films are hot and that market is continuing to grow as well as new advancements in these films.  Four films have been developed and their use is becoming more present in buildings.  By 2020, it is predicted that these films will be used on a large scale.  (www.technicalwindowfilms.co.uk/window-tinting-news/future-window-films/) The four films are:

• Photochromic film which darkens when exposed to light like transition eyeglasses.
• Smart glass or electrochromatic changes from a clear glass to a frosted glass or a colored glass with an electrical current.  The current is controlled by a switch, a computer, or even a cell phone.  This can add privacy to an office, conference room, etc.  Another example is film applied in a lobby that is controlled by a computer to change to a darker film when the light is bright and then lighter or clear when it gets dark.
• Photovoltaic film converts daylight into electricity.
• Daylighting or Daylight redirecting film allows more light in at the top of the glass and directs it into the room reducing the need for electric lighting.  Presently, a metal shelf can be used for this, but the film is much more attractive and easy to clean.

Solar Vision, Inc is keeping well informed about these new technologies to bring its customers the best available product.

Window Film Reduces Light Pollution

Window film can reduce light pollution.  Depending on the type of film, Visual Light Transmittance can be reduced by 45%-50%. According to Global Trends and Implications for Downtown Denver, a paper prepared by Progressive Urban Management Associates in 2006, 3 billion people lived in cities and by 2050 6 billion people will be living in cities.  The implications for energy consumption, transportation, food, and environmental protection caused by this rapid urban expansion makes the need for sustainability  critical.

The management of artificial light is one of the many areas urban planners must prepare for.

Light pollution causes:

• Sky glow which is the light surrounding the urban skies is caused by over illumination of commercial spaces and poorly planned street and building lights. The stars are difficult to see in urban areas.
• Light trespass is the light from a building shining into another building.  It may be difficult to sleep in an apartment building next to a building that has a lot of light during the night.
• Endangerment to wildlife who are confused by the light.  Nocturnal animals do not hunt or mate as they are meant to.  More animals are in danger of becoming extinct.
• Human health is being affected.  Vision, headaches, hypertension, and an increased chance of developing cancer are some of the health issues.  Sleep is disrupted by the light and melatonin is decreased. (physics.fau.edu/observatory/lightpol-environment.html)

There are things that city planners and all of us can do to decrease light pollution.  One of them is to apply window tint to windows that meets 45% inside to outside visible light transmittance and/or use window treatments.  On a beach in Florida, new construction is required to put in windows that meet the 45% requirement because sea turtles are confused by the light and go inland instead of going out to sea.  People that already have homes are helping to save the turtles by retrofitting their windows with window film to meet the requirement. (Thisbigcity.net)

Window film meets LEED Certification requirements in this area and is worth 1 point toward building certification.

Credit 7:  Light Pollution Reduction (1 point)

Intent: Eliminate light trespass from the building and site, improve night sky access and reduce development impact on nocturnal environment.

Denver is a city that is at the forefront of working to make sustainable urban environments.  Denver is also experiencing rapid urban growth.  The challenges in keeping up with all the facets of urban growth is being met by our city leaders and urban planners with great care.

Anti-Spy Window Film

Anti-Spy window film is blocks wifi and cell phone signals.  It is made up of aluminum and titanium sputter coated polyester in several layers. It has a scratch resistant coating.  According to the Standard Test Method for Measuring the Electromagnetic Shielding Effectiveness of Planar Materials, it is 90-99% effective.  Natural light still enters the room. Businesses that have a lot of glass and use wireless devices are susceptible to being targeted by people who know how to get into their systems.

Anti-Spy window film can:

• Help prevent credit card fraud
• Eliminate the outside use of wireless internet connections
• Prevent corporate espionage
• Help stop eavesdropping by hackers
• Reduce the signal signature of a building

Wifi signals can go through walls, but most go through windows.  Architectural trends show that more and bigger windows are being put in offices all the time.  Along with that, the use of wireless signals has also increased and will continue to do so.  These things combined increase security risks.  Reflective window film reduces leakage.

To increase its effectiveness a metal strip can be placed around the gap between the film and the window frame.  No window film application can be done with no gap between the film and the frame though the gap is small.  1/8 inch is an acceptable application.

Solar Vision is experienced in applying this type of window film.

Trends in Commercial Architecture

Trends in commercial architecture include lots of glass. Glass walls are bigger than ever.  Glass walls create lots of opportunities to use natural light and open spaces.  Along with these glass walls, come new innovative uses in design using 3M Fasara frosted and decorative window films.  These films allow in light while adding just the amount of privacy wanted by the inhabitants.  The design elements are limited only by the imagination. (solutions.3m.com) Not only does the decorative films allow light and beauty in these spaces, they also add safety.  The film lets someone know the glass is there and will not be walked into.  In case a window is broken the fragments will hold together.

The glass with film is easy to care for.  It can be cleaned as any other glass after 30 days.  A plus is that finger prints do not readily show.

Frost Film Used for Privacy

Frost film used for privacy on these windows.  Sometimes blackout film is an option.  The frost film lets in natural light while the blackout film blocks all of the light.  These pictures show how the film looks from the inside and from the outside.  The client was very pleased  with the result.

Solar Control for Apartment Living

Solar Control for apartment living can be achieved through the use of a variety of solar control window films.  I have seen a number of apartments that get a lot of sun have all kinds of things in their windows to make it more comfortable.  I've seen cardboard, newspaper, sheets, and even a mattress.  Rental  property owners may ignore this or pose fines, but ultimately it affects the value of the property.  Solar control window films can greatly reduce the amount of sun and glare coming into a room.  Because it eliminates 99% of the UV rays, furnishings are not damaged.  It has the added protection of reducing the risk of skin cancer. Apartments usually are fitted with single layered glass.  Applying window film will give the window the effect of being double layered glass.  This would result in energy savings.  If a rental property company is energy conscious, it could advertise as making these changes to help save energy.  Solar control window film is especially valuable in those areas that get direct sunlight especially in the loft apartments on the top floors.

Window film is an relatively inexpensive way to make apartment living more comfortable.  Window film is easy to clean.  It is cleaned as any other window after 30 days.

3M Film Uses in Hotels

3M film uses in hotels are many.  Window film can provide energy savings, comfort, and added safety and security.  Architectural films can provide beauty and give the hotel a unique look.  The creative environment is limited only by one's imagination. Safety and Security is enhanced by using a safety and security film to prevent break-ins.  In vulnerable areas, the film will prevent intruders from breaking a glass to get in the building.  Often hotels are in places without a lot of people around, so this would give extra security to a building.  Another way 3M window film can add to security is that if there would be an event such as strong winds, hail, etc. which could break the glass, the glass would hold together and not allow shards of glass to fly and cause injury.  If a hotel is in an area where there is graffiti, anti-graffiti film can be applied to the glass protecting it from paint, acid, scratching.  The film acts as a sacrificial layer which takes the graffiti and can be removed. (solutions.3m.com)

Solar Control can be achieved through 3M Window film.  Glare can be greatly reduced.  Heating and air conditioning costs can be reduced with the application of one of 3M's variety of solar control films.  UV rays are reduced by most films by 99 % eliminating the harmful effects of the UV rays on carpeting, drapes, art, furniture and other furnishings.

Decorative Films can be used in the building to make updated creative environments.  Graphics on film can put any picture on a wall at any size.  Fasara films can be used to add privacy and beauty.  The films can be die-cut or custom printed. Di-Noc can be used to remake surfaces such as pine into teak or paint into marble. There are hundreds of surfaces to choose from.

Solar Vision's Mission Statement is to inspire a passion for and generate living and working environments that are comfortable, safe, energy efficient and innovative.  Let Solar Vision's staff inspire you.

Exterior Prestige Window Film

Exterior Prestige Window Film is made using nanotechnology.  The film consists of over 200 thin layers and is the thickness of a piece of paper.  This technology allows the film to provide superior heat control and glare reduction while preserving exterior and interior window views.  The film contains no metals so it does not interfere with wireless signals.  It is used in areas that are difficult to film from the inside.  If there is furniture that is difficult to move or permanent fixtures that make it impossible or near impossible to put on a film from the inside, then Exterior Prestige Window Film is the solution. Exterior Prestige Window Film might also be used if there is a high likelihood of breakage of a particular type of glass. With the exterior film, the sun does not heat the glass. (solutions.3m.com) Exterior Prestige Window Film:

• has a strong scratch resistant coating
• not self-cleaning, but repels water
• has virtually no chance of glass breakage
• can be used on dual or triple pane glass
• has high heat rejection with high visible light transmission
• comes in Prestige 40, 70, and 90
• reduces air conditioning costs

DICHROIC 3M Glass Finishes

Dichroic 3M glass finishes is a film that can be applied to glass or some plastics that show an array of color.  The color changes with the light that it is exposed to, the color of the surface it is applied to, and the angle it is viewed from.  This amazing film creates unique effects in whatever environment it is used in. (http://solutions.3m.com/wps/portal/3M/en_US/architectural-markets/home/glass-finishes/dichroic/) Dichroic 3M glass finishes are mostly used in commercial buildings, but can also be used in a home for a unique effect.  The look can be obtained by purchasing dichroic glass, but using film is a much more cost effective solution.  The application of it is also much  less expensive than installing the glass.

Dichroic film  'plays' with light, reflecting and bouncing it to reveal a natural color spectrum.

Dichroic film is:

• a visible color shift from both sides of the film-covered glass.
• applicable for glass and many plastics.
• available in warm and cool colors.
• made of premium grade multi-layer polyester.
• non-metallic, non-conductive and non-corrosive.

Colors:

• The Chill shift in cool tones-blue, magenta, yellow and  gold/blue color regions
• The Blaze are in warm tones

  

  

The film needs to be applied in an area where it will not receive abrasions.  A clear laminate protection is recommended.

3 New 3M Films

3 new 3M films were announced at a webinar last Friday.  3M expects to introduce at least 10 new products over the next year. Two of the new products are value priced security films.  One has a matte finish.  It is priced for use on a large scale when prices need to be low.  It carries a 1 year warranty.  It is not as good as the Fasara film.  The Fasara is whiter and is easier to cut.  Also the Fasara leaves less residue when it is removed.  The new film is able to compete with the lower priced films though Fasara is always the more recommended product.  When pricing is an issue, this new film can meet a clients needs.  The other security film is a black-out film and again is value priced.  It is black on black and is glossy.  It is used on the interior of the glass. (solutions.3m.com)

The third new 3M film is a mirrored film for a one-way mirror effect.  No mirrored film that makes a one-way mirror is completely mirror on one-side and see through on the other. It is impossible to make this. The effect is achieved by a combination of light and film.  The room on the mirror side must be brighter than in the room of the non-reflective side of the film.  When I was teaching, we had a one-way mirrored glass from the teachers office to the classroom to be able to record student behavior.  It was not film, but a special made glass for that purpose.  It was not as effective as it could have been because of the lack of understanding of how the lighting affected the way it worked.  When it was first installed, that might have been explained to the school staff but as time went on the information was not passed on to new staff.

These 3 new 3M films announced will be available March 1.

3M Fasara San Marino Film

3M Fasara Milky Milky (San Marino) Film SHMAMM (solutions.3m.com) was used on this restaurant in the newly renovated Union Station in downtown Denver.  San Marino film can add privacy or in this case a decorative accent.  The film on the glass gives just the right touch to add to the ambiance of the restaurant. 3M Fasara Glass Finishes come in 50+ designs.  Fasara provides the advantages of etched, sandblasted and textured glass at a fraction of the cost.  When styles change or occupants change, the film can be removed.  The window can remain plain or a new type of design can be applied to the window.  This can be done at a much smaller cost than replacing  windows.

Benefits Include:

• Beauty of the glass is enhanced by transforming plain glass into the look of cut or textured glass.
• The amount of privacy provided can be tailored to the clients needs.
• The film is easily applied and is beautiful and durable.
• The film is constructed of durable and flexible polyester.
• The glass can be cleaned like any other window after 30 days.

  

Die-Cut Decorative Film

Solar Vision applies a lot of Die-Cut Decorative Film.  The film is applied in new construction sites as well as sites that are remodeled.  Most of the film we use is 3M Fasara Film.  The 3M Fasara is easy to work with and gives excellent results. Occasionally, we do apply other brands.  It all depends on the contractor, decorator, or owner.  Decorative film is used in place of etched or sandblasted glass because the expense is much less.  Also if styles change or a new company moves in the film can be professionally removed and replaced. Decorative Film Provides:

• Privacy in offices or conference rooms.
• Light from outside can still filter to other parts of the room.  People are more productive in natural light.
• If their would be a natural or other physical event, the glass would be held together and there would not be flying shards of glass.
• The decorative film creates a modern look and adds to the ambiance of the building
• Consistent look throughout the building
• Branding of company is established through out the area
• Money savings
• A creative environment is established which draws customers and increased employee productivity and satisfaction.

  

• 

School Comfort and Window Film

School classrooms that are  comfortable are more conducive to learning.  The first consideration for window film is school safety. (See previous article)  Window film can be used in a number of ways to improve school comfort, make learning easier, and save energy as well. Comfort and Energy Savings

During my 34 years of teaching, I have been in a number of buildings.  All of those buildings have had hot spots.  There are rooms where the sunlight coming into the room is unbearable during certain parts of the day. It is distracting to be in a classroom that is overly hot. To keep those rooms at a temperature that is somewhat comfortable, the air conditioning has to be turned up. Many of the rooms in the school are then too cold and students need their sweaters or just shiver.  A hot room does not help students concentrate on their studies nor does a cold one. More schools are going to a year round schedule, so they have to deal with even more summer heat.  Solar Control Window film applied to classroom windows reduce the heat entering the room.  Not having to lower the thermostat, saves energy.  In winter, the film acts as an extra insulator on the window.  Savings is realized in the winter also.  The US Department of Energy says a third of a building's cooling comes from solar gain through the windows.  Window film will make the windows more efficient.  (http://solutions.3m.com/)

Window film also eliminates glare on whiteboards.  The film protects occupants from harmful UV rays which can cause skin cancer.  Some rooms may require a combination of window film and blinds.  When the blinds do not have to be closed, natural light enters the classroom.  Students learn better in natural light. Eyes get less tired.

We know that students learn better in natural light.  Attendance and behavior is also improved. (http://www.healthyschools.org/Daylight.pdf) Window film still allows natural light.  A new 3M Window Film is 3M Daylight Redirecting Film.  If you have just the right space, the film brings in more light at the top of the window and redirects it to the room.  This lessens the need for artificial light.

Mirrors or Perforated Graphics

I worked in some areas where we took data on the behavior of students.  Graphics or mirrors can be put on  the window to observe students undetected.  The graphics are made with tiny dots. On one side you see a picture.  On the other side you can see through.  A mirrored film can be put on a window and from the other side observations can be made.  This could work well when the dean's office has a window to the cafeteria.  The possibilities are endless in the school.

Smart or Switchable Film

A smart film can be turned on and off.  When it is on the film is frosted.  When it is off the window is clear.  Think of the many uses for offices like the principal's office. He/She can see what is going on when it is off and can have privacy when he needs it for conferences with parents, teachers, students, etc.

Sports Viewing Rooms

Black out film can be used in athletic viewing rooms to eliminate screen glare.  Solar Vision has installed this at a number of colleges and universities.

Anti-Bacterial

A film that is not a window film, but is an architectural film is Di-Noc.  Some Di-Noc contains silver which cuts down on the growth of bacteria.  In areas, such as the nurses office and preschool classrooms, the film applied to smooth walls may help reduce the spread of germs.

Solar Vision can do a study of how window film can save energy and help you plan ways to use window and architectural films in your school.  If you would like a study done, give us a call at 303-862-6376 or e-mail us at info@coloradosolarvision.com.

School Safety Improvement

School safety is an ever growing concern for schools. As a teacher of 34 years, I have seen a number of ways window films can be effectively used to improve school safety. The window film is retrofitted into already existing buildings which is much less expensive than replacing windows. Applying the film creates no mess and the windows are easily cleaned. Safety

Accidents involving glass account for a large percent of injuries in schools. Large areas of glass may not be seen by students and they may run into them. It is important to make the glass more visible. This can be done by applying opaque film or simple patterned film to the glass such as Fasara (http://solutions.3m.com/ ) It is important to make it apparent that the glass is there. The film can cover all or a portion of the glass. Every window or other transparent surface in a wall, partition and door or gate should be of safety material or be protected against breakage of the transparent material. It should be appropriately marked or have something to make it apparent. Film around door handles also help make the glass visible. Graphics can be used to make the glass more visible. The film can add to the learning environment and make it very creative and appealing. Graphics can be used to increase school spirit or motivate achievement in students and staff. Any picture or logo can be printed on the film.

Safety glass is required in high risk areas. Window film will hold the glass in place if someone runs into the glass. Tempered or toughened glass breaks into squares. Tempered glass may be defective because of manufacturing flaws. Impurities can get into the glass. Sometimes during installation small chips may occur. As the glass expands stresses will develop which may break the glass. When the stress is greater than the strength of the glass it will break. Window film on tempered glass assures that no one will be cut by the glass. Clean up is also very easy.

Glass should be:

•  Safe from breakage
•  Visible to avoid accidental collision

Safety can also be increased during weather events with window film. With straight line winds or a tornado most injuries are caused by flying glass. The window film holds the glass shards together. People in the building will not get cut by flying glass.

Security

Unfortunately, we live in a world where we need to keep unwanted intruders out of our schools and away from our children. As a teacher in a rural public high school, quite often we had bomb threats. Real or just a stupid prank, the school officials had to take it seriously. We would have to be moved to another school or a nearby church until the building was secure. If the threat had been real and there had been an explosion, bomb blast window film would prevent glass shards from entering the rooms and injuring students. 90% of all injuries from bombs is caused by flying glass. Even a small piece of glass can injure someone.

If a gun was rumored to be in the school or if there was a tip of a threat, then the school goes into lock down. All the classroom doors are locked until the threat has passed. Schools now have all outer doors locked. One generally has to be let into the school by someone in the office. If a person comes to the door shooting or begins shooting after entering, there is bulletproof window film. The film is expected to delay an active shooter from entering a school from three seconds to two minutes.

Security window film with an attachment will prevent entrance into the building.  A person using something like a baseball bat or crowbar, will be disappointed. Chances are the person will move on. A determined person still may get into the building, but his entry will slowed to the point that the police will have an opportunity to arrive on the scene.  The security film helps to prevent break-ins for theft or vandalism.  Solar Vision has applied 3M™ Safety and Security Window Film to several  school entrances as a test sites for other schools. 3M™ Safety and Security Film is being used in an increasing number of schools. 3M recommends using the Ultra Series S600 or the Safety Series S140. Impact Protection Attachment Systems bond the filmed window to the frame optimizing security. (http://solutions.3m.com/wps/portal/3M/en_US/Window_Film/Solutions/Support/Safety_and_Security_Window_Films)

At a 2014 Campus Safety Conference held at the University of Southern California , Brad Spicer, SafePlans CEO, outlined strategies to improve the safety of main entrances. One thing he recommended was having shatter resistant security window film applied on the doors and windows to make it harder for intruders to enter the building.. (http://www.campussafetymagazine.com/article/physical_securitys_role_in_a_k_12_environment)

Why use security Film in Schools:

•  Security film is less expensive than replacing all windows and doors with laminated glass.
•  The security film is easy to apply over existing glazing
•  The film doesn't stop a determined individual from entering a building, but gives extra time for help to arrive.

Anti-Graffiti

Why do kids do graffiti??? It is such a waste and such a problem in schools. Anti-Graffiti film can be applied to windows. The film acts as a sacrificial layer. The acid, paint or permanant marker is on the film. The film then can be removed and reapplied. Doing this quickly keeps from giving the vandals the attention they seek. The film can be applied to bathroom mirrors and outdoor signs as well.

National Accounts

National Accounts across the United States have given our installers opportunities to see many things. In Philadelphia, they got to see the place that the movie "Rocky" made famous. They've been to Washington D.C. and drove down the Oregon coast from one job to the next. On a lonely road in Savannah, they came upon a crossroad with hundreds of cats. The cats were in trees and on the street everywhere. They have listened to the blues and country music in Virginia and Louisville. The song "I've Been Everywhere" by Geoff Mack and made popular by Johnny Cash seems appropriate to their experience. (They did travel by plane though.)

I've Been Everywhere by Geoff Mack I was totin' my pack along the dusty Winnemucca road, When along came a semi with a high an' canvas-covered load. "If you're goin' to Winnemucca, Mack, with me you can ride." And so I climbed into the cab and then I settled down inside. He asked me if I'd seen a road with so much dust and sand. And I said, "Listen, I've traveled every road in this here land!"

[Chorus:] I've been everywhere, man. I've been everywhere, man. Crossed the desert's bare, man. I've breathed the mountain air, man. Of travel I've had my share, man. I've been everywhere.

I've been to: Boston, Charleston, Dayton, Louisiana, Washington, Houston, Philadelphia, Portlandia, Louisville, Nashville, Knoxville, Minnesota, Glen Rock, Black Rock, Little Rock, Oskaloosa, Tennessee to Davenport, Spirit Lake, Grand Lake, Devils Lake, Salt Lake, for Pete's sake.

Solar Vision carries national accounts. The team travels all over the United States. Solar Vision does installations for clients with multiple buildings spread across the United States. Doing business with us makes it easy to get the film you need installed and to have it be consistent throughout the US. In situations where union membership is required, Solar Vision acquires local installers for the job. Solar Vision makes all the arrangements and still assures the quality of the work. This past month teams have been in New Hampshire and Daytona Beach, Florida. Procuring through one company means: ⦁ Consistent quality and workmanship ⦁ Best pricing available ⦁ The same look can be achieved for each of your sites. ⦁ Communicate with one person ⦁ Time saving Solar Vision has a proven track record completing projects for Hallmark and Sports Authority stores throughout the states.

3M Fasara Decorative/Privacy Film Application

3M Fasara Decorative/Privacy Film adds privacy to this work space.  It is a good way to reduce distractions in the workplace. The 3M Fasara Film also lets in natural light reducing the need for extra lighthing.  See the difference the film makes to these windows.

Fasara Film comes in 59 different designs.  They take the place of textured, sandblasted, etched, cut or other decorative glass for a fraction of the cost of decorative glass.  The film provides privacy and adds beauty to a room.  It can be customized by adding extra light or design.

Benefits of Using the 3M Fasara Decorative/Privacy Film Include:

• It is relatively inexpensive compared to decorative glass.
• There is a large variety of styles to choose from.
• After 30 days, it can be cleaned just like you would any other window.
• If styles change, it can be removed and left clear or replaced with another style of film.
• If there is an event which causes the window to break, the pieces will hold together. Injuries from flying glass will be prevented.
• The application is durable, fast, and beautiful.
• 3M and Solar Vision stands behind their product with a 5 year warranty for thermal shock damage.

How Can the 3M Fasara Window Film Be Used:

3M Fasara Decorative/Privacy Film can be used in offices, conference rooms, and lobbies. Retail stores, restaurants,and hospitality venues can use the decorative film.  These glass finishes can be used on partitions, showers, verandas and homes.  The film can be customized to give just the right amount of privacy, light, and decorative value.  The film can be computer cut for precision. The Fasara glass finishes are primarily an interior film, but 2 of the films can be used on the exterior. A beautiful  space  gives a favorable impression to workers and clients.  The addition of the light that is allowed into the room instead of a solid partition adds to worker productivity.